A thick book or diary with a suitable cover can be easily turned into an original clutch.
When choosing an important criterion is the thickness of the "source of knowledge", because inside a stylish accessory should be placed mobile phone, mirror, lipstick and other women's things.
For work you will need:
- unnecessary book;
- decorative wooden fastener;
- 3 sheets of parchment paper slightly larger than the size of the book;
- glue for decoupage;
- needle with thread;
- fabric for the inner lining;
- glue for wood and epoxy for fastening fasteners;
- knife for cutting paper.
Carefully cut a rectangle on all pages of the book, as shown in the photo below, glue the finishing fabric on the inside of the cover and let it dry. Open the book in the middle and put the parchment in it. Another 2 sheets are placed from the edges, counting from the cover of 10 pages. Now all the sheets in the book are divided into 4 parts. Sheets of internal parts need to be glued together. Parchment in this case serves as protection against accidental adhesion. It is important to pre-identify the place of firmware firmware. Here the final gluing will be done later.
Glue-lubricated book is placed under the press until dry.
Determine the degree of openability of the clutch. From this will directly depend on the size of the inserts.
We make a template, and then we cut out the inserts, fold them inside out, in the right places and denote the fold. Sew the inserts so that the folds go inside the book.
Additionally, gluing the book in the right places, fasten the fastener.
Stylish clutch ready. It's time to fill it and go for a walk.